THERMOTHERAPY

A device with stainless steel housing for heating and mixing of mud with specially shaped mixer crushing a mass, 200 L, a portable control device with a cord; energy-saving by applying the oil jacket, microprocessor-controlled electronics of heating process, heating temperature adjustable from 30 to 60°C.

A device with stainless steel housing for heating and mixing of mud with specially shaped mixer crushing a mass, 200 L, a portable control device with a cord; energy-saving by applying the oil jacket, microprocessor-controlled electronics of heating process, heating temperature adjustable from 30 to 60°C, a system of maintaining the desired temperature of the mass preventing it from burning, delayed start option for the preparation of mass at a specific time. The base with 4 directional castors with brakes.

• Temperature range: 30-60°C
• Working volume of container: 200 l
• Power supply: 400 V / 50 Hz
• Dimensions: 101 x 97 x 132 cm
• Power consumption: max. 3,6 kW
• Weight: 380 kg

A device with stainless steel housing for heating and mixing of mud with specially shaped mixer crushing a mass, 130 L, a portable control device with a cord; energy-saving by applying the oil jacket, microprocessor-controlled electronics of heating process, heating temperature adjustable from 30 to 60°C

A device with stainless steel housing for heating and mixing of mud with specially shaped mixer crushing a mass, 130 L, a portable control device with a cord; energy-saving by applying the oil jacket, microprocessor-controlled electronics of heating process, heating temperature adjustable from 30 to 60°C, a system of maintaining the desired temperature of the mass preventing it from burning, delayed start option for the preparation of mass at a specific time. The base with 4 directional castors with brakes.

• Temperature range: 30-60°C
• Working volume of container: 130 l
• Power supply: 400 V / 50 Hz
• Dimensions: 99 x 86 x 132 cm
• Power consumption: max. 3,3 kW
• Weight: 360 kg

• consists of a tank for fangoparaffin mass with a cover
• heating elements under its bottom and on its side wall
• structure rests on a supporting frame with two legs fitted to the working table
• mixer equipped with an automatic mixing arm which is started every few minutes to maintain even temperature of the mass in the container and protects the mass from delaminating
• heated drain valve of the mixer, which prevents the mass from congealing
• mixing arm drive is stopped automatically when the cover is lifted
• corrosion-resistant steel elements (easy to clean)
• housing made from rolled stainless steel sheet
• working parameters presented on large display placed on portable panel
• electronic controller enables programming of the following functions:
  Heating: normal operation in temperature from 55 to 80^o C
  Mixing: forced mass mixing (accelerated heating process of added cold mass)
  Sterilization of the mass within a defined temperature range
  Start in: delayed operation after a programmed number of hours

Accessories:

• Foil lengh 1000mb, width 65cm
• Foil for APS 10 rolls (roll: lengh 50 cm, width 50 cm)
• Interlining 2 rolls, each lengh 200mb, width 50cm
• Warming Copresses filled with paraffin 360 x 280 mm (10 units)
• Foil hanger
• Double hanger: foil+interlining
• Foil knife
• stand for additional traces
• aluminium traces for C-14 (60x40x2 cm)

• Temperature range: 55 – 80 °C
• Working volume of container: 40 l
• Sterilisation temperature: 110 °C
• Power supply: 400 V / 50 Hz
• Dimensions: 750 x 640 x 660 mm
• Power consumption: 2,3 kW
• Weight: 90 kg

A device for heating and mixing mud mass.

• consists of a tank with a cover (with o-ring)
• heating elements under its bottom and on its side wall
• structure rests on a supporting frame with two legs attached to the work-top
• mixer equipped with an automatic mixing arm which is applied every few minutes to maintain the right temperature and consistency of the mud mass in the container
• mixing arm drive stops automatically when the cover is lifted
• corrosion-resistant steel elements (easy to clean)
• housing made of rolled stainless steel sheet
• working parameters presented on a large display placed on a portable panel
• electronic controller enables programming the following functions:

Heating: normal operation in temperature from 30 to 55° C.
Start in: delayed operation after previously indicated time

Optional equipment:

• C-14
• F-40 base – stainless steel rack

• Temperature range: 30 – 60°C
• Working volume of container: 40 l
• Power supply: 400 V / 50 Hz
• Dimensions: 750 x 640 x 660 mm
• Weight: 75 kg
• Power consumption: max. 2,3 kW

A device for melting fango-paraffin mass for thermal therapy procedures and keeping it at a specific temperature.

• consists of a tank for fango paraffin mass with a cover
• heating elements under its bottom and on its side wall
• structure rests on a supporting frame with two legs attached to a work-top
• mixer equipped with an automatic mixing arm which is applied every few minutes to maintain even temperature of the mass in the container and protects the mass from delaminating
• heated drain valve of the mixer, which prevents the mass from congealing
• mixing arm drive stops automatically when the cover is lifted
• corrosion-resistant steel elements (easy to clean)
• housing made of rolled stainless steel sheet
• working parameters presented on a large display placed on a portable panel
• electronic controller enables programming of the following functions:
  Heating: normal operation in temperature from 55 to 80° C
  Mixing: forced mass mixing (accelerated heating process of added cold mass)
  Sterilization of the mass within a defined temperature range
  Start in: delayed operation after previously indicated time

• Temperature range: 55 – 80°C
• Working volume of container: 40 l
• Sterilisation temperature: 130°C
• Power supply: 400 V / 50 Hz
• Dimensions: 750 x 640 x 660 mm
• Power consumption: max. 2,3 kW
• Weight: 90 kg

A device for heating and keeping the mass at a specified temperaturerange. It can serve as a base for installing all versions of F-40 from Thermo-mix family.

• mass is stored on trays (14) placed inside the heating unit
• coil heater with the air flow fan allowing for maintenance of a specific temperature
• unit rests on a supporting frame placed on four legs
• corrosion-resistant steel elements (easy to clean)
• housing made of rolled stainless steel sheet
• working parameters presented on large display placed on portable panel
• electronic controller enables programming of the following functions:
  Constant work: maintenance of a specific temperature between 25 and 80° C
  Daily cycle: time of the heating cycle (on/off) repeated daily
  Start in: individually set delayed operation (“weekend”) program

• Temperature range: 25-80°C
• Working volume of container:14 trays size 400 x 600 mm
• Power supply: 230 V / 50 Hz
• Dimensions: 780 x 680 x 760 mm
• Power consumption: max. 2,3 kW
• Weight: 99 kg